Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Window Replacement: The Naples Owner’s Guide
If you have a Mr-Glass window in Naples with a failed sash, fogged glass, or a part that’s worn out, we stock and install Mr-Glass-compatible replacement components, and most jobs run between $175 and $650 installed depending on the part and the series. We’re an independent service provider, not a Mr-Glass factory outlet, which matters because it means we match parts to your actual frame rather than pushing whatever’s on a shelf. Most Naples owners discover a problem the same way: a window that suddenly won’t lock, condensation trapped between panes after a humid summer, or a latch that snapped off in May when the afternoon heat started flexing the hardware.
Here’s the straight answer on cost, timing, and what’s actually worth fixing versus replacing. If you want a number for your specific window, call (239) 899-6411 and we’ll walk you through it.
Which Mr-Glass Models This Applies To
Mr-Glass has produced several window series over the years, and the replacement path depends on which one you have. The two most common in Naples homes are the single-hung aluminum frames from the mid-2000s and the impact-rated casement and horizontal roller lines that went into a lot of Gulf Coast builds after Hurricane Irma. The biggest gotcha: Mr-Glass changed its sash clip spacing on some series from 3/4-inch to 7/8-inch, so a sash from a 2008 unit won’t always seat into a 2015 frame without an adapter or a custom shim. We check the stile width and the screw boss pattern before ordering anything, because an off-the-shelf sash that looks right can leave a 1/8-inch gap at the lock rail.
You can identify your series by looking for the etched code on the bottom corner of the glass or on the sticker inside the frame channel. If the sticker’s gone, measure the visible glass width and the frame depth and we can usually narrow it down in one phone call. For Mr-Glass specifically, we lean OEM when the part is safety-critical, like an impact sash or a locking mechanism, and we’re comfortable with quality aftermarket equivalents for rollers, weatherstripping, and handle sets where the spec is straightforward and the savings are real.
Signs Your Mr-Glass Window Replacement Is Failing
- Condensation you can’t wipe away. When the inert gas between panes escapes through a failed seal, Naples humidity gets in and fogs the glass from the inside. This means the insulated glass unit, or IGU, has failed and won’t come back on its own.
- A sash that drags or drops when you open it. The spring balance cartridge inside the frame wears out, usually in the coastal air where salt works into the coil. You’ll feel it get heavier over a season, not all at once.
- A lock or latch that suddenly stops engaging. Aluminum frames flex with temperature swings from a Naples afternoon to evening, and a striker that was marginally aligned stops catching. Sometimes it’s the hardware; sometimes the sash has settled out of square.
- Drafts around a closed window. Weatherstripping on Mr-Glass frames is a dense foam that compresses over a decade, and once it loses its bounce, every east-facing window on an A/C-cooled wall starts leaking energy you’re paying for.
- Visible corrosion at the corners or along the track. Salt air is hard on aluminum. If the corner keys are corroded, the frame is losing structural integrity, and swapping only the sash won’t fix it for long.
Replacement Cost & What’s Included
| Part / Service | Typical Installed Price in Naples |
|---|---|
| IGU (insulated glass unit) replacement, standard size | $220 - $420 |
| Spring balance cartridge, per sash | $85 - $160 |
| Handle set and latch replacement | $65 - $140 |
| Full sash replacement, Mr-Glass-compatible | $275 - $650 |
| Rollers and track service, per window | $95 - $185 |
Every quote from Winslow Windows & Doors is a fixed, line-item price before we start, and the number we quote is the number you pay. We include haul-away of the old part, a check of the surrounding frame and seals, and a workmanship warranty on the replacement. Ed Winslow’s name is on the business, and the 36500-Day Done Right Promise means if we miss something, we return and make it right without a back-and-forth about whose fault it is. Since 2011, that’s been the standard in Naples, and we’ve never seen a reason to lower it.
DIY or Call Us?
Some things you can check safely: clean the track, tighten a loose handle screw, note where the sash binds. But the moment you’re dealing with a spring balance under tension or removing an impact sash, call a pro. These components store enough energy to break fingers if released wrong, and a dropped impact sash can shatter a tile floor or worse. We’ve taken more than one call from a Naples homeowner who got the sash halfway out and realized it was heavier than expected.
We answer the phone around the clock at (239) 899-6411. A live person, not a menu. Tell us what the window is doing and we’ll tell you what it likely needs and what it’ll cost to fix. If you’re inside our home county, there’s no trip charge to come out and look.
FAQs
In Naples’ salt air and humidity, Mr-Glass IGUs typically last 10 to 15 years before the seal fails, while hardware like handles and rollers usually needs attention around year 8 to 12. The coastal exposure shortens every part’s life compared to inland Florida homes. Call (239) 899-6411 if you’re seeing early failure, and we’ll tell you whether it’s a defect or normal wear.
Hardware, rollers, and weatherstripping can often be repaired in place, but a fogged or cracked IGU needs the glass unit replaced, not just resealed. Once the seal between panes is gone, the gas is gone and no field repair restores it. We’ll give you an honest assessment and never sell a replacement when a repair will do.
A standard IGU or hardware replacement takes 45 minutes to an hour on site, and we schedule the visit after the part is matched to your series so we don’t book you twice. Custom sashes that aren’t on our truck may take 3 to 7 days to arrive. We’ll give you a real timeline before we start.
We keep the most common Mr-Glass replacement parts on our trucks: spring balances, handle sets, rollers, and standard-size IGUs for the series we see most often in Naples. If your part isn’t on board, we’ll have it fast and install it once it’s in. Call (239) 899-6411 and we’ll check inventory while you’re on the line.
Contact Us for Mr-Glass Window Replacement in Naples
Winslow Windows & Doors has been fixing and replacing windows in Naples since 2011. We’re the local team authorized to install Mr-Glass products alongside PGT, CGI, CWS, and the other brands we stock, and every job gets Ed’s 36500-Day Done Right Promise. Every technician who shows up is background-checked and in uniform, and we publish our address and license number so you know who’s behind the work. There’s a permanent $40 discount on any repair over $200, free second opinions on written estimates, and a 10% discount for seniors and veterans. Call (239) 899-6411 to schedule your free estimate. We’re the one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Naples and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After