Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Window Replacement: The Naples Owner’s Guide
If you own ES Windows and one has failed, replacement typically runs $450-$1,100 per window installed in Naples depending on size, series, and whether it’s impact-rated glass. We’re an authorized ES Windows installer, which means we can source the exact replacement unit matched to your original frame rather than forcing a generic sash into it.
Most Naples homeowners discover the problem the same way: a window that won’t roll smoothly, condensation fogging between the panes, or a latch that no longer seals tight against summer humidity. By the time you notice, the failure usually started months earlier, often at the seal or roller track, which is where ES Windows sees the most wear in Southwest Florida’s salt air and heat.
Which ES Windows Models This Applies To
ES Windows builds several distinct series, and they’re not interchangeable. The ES 7000 (non-impact) and ES 8000 (impact-rated) are the two most common lines we see in Naples homes, but we’ve also replaced units from the ESS series on older builds from the early 2000s. The key identifier is a small white label on the inside edge of the frame, usually on the non-hinge side, showing the series number, glass thickness, and date of manufacture.
Here’s the compatibility gotcha most homeowners hit: ES Windows changed its roller assembly design around 2016. A pre-2016 sash will not accept the newer roller without a track adapter. We stock both the OEM ES replacement parts and a quality aftermarket equivalent, but we’ll always tell you which one makes sense for your specific window. If you’re on a tight timeline and the aftermarket part matches the original spec, we’ll recommend it and price it lower. If you’ve got a high-rise unit with wind-load certification requirements, we’ll insist on OEM because the paperwork matters.
Signs Your ES Windows Window Replacement Is Failing
- Fog or condensation between the panes. That’s a failed seal. Once the argon or krypton gas escapes, the window loses its insulating value and Naples humidity gets in. It won’t dry out on its own.
- Hard rolling or a sash that jumps the track. In Naples, the salt air corrodes the nickel-plated rollers ES uses. We replace these regularly on windows facing the Gulf side, where airborne salt eats through the plating in four to six years.
- A latch that won’t fully engage. The lock strike on ES Windows has a nylon sleeve that cracks over time. When it’s worn, the window will close but not seal, which drives up your cooling bill.
- Visible frame warping or cracks at the corners. ES aluminum frames are extruded, but over twenty-plus Florida summers, thermal expansion and contraction can create hairline cracks at the mitered corners, especially on larger fixed windows.
- Water staining on the interior sill after heavy rain. That’s usually a failed sill gasket, not the frame. ES uses a foam wedge design that flattens permanently after about a decade. It’s a $40 part and a thirty-minute fix, not a full replacement if caught early.
Replacement Cost & What’s Included
Here’s what we quote in Naples, and what drives the numbers:
| Window Type | Installed Price Range (Naples) |
|---|---|
| ES 7000 single-hung, standard size | $450 - $650 |
| ES 7000 horizontal slider | $550 - $800 |
| ES 8000 impact-rated single-hung | $700 - $1,100 |
| ES 8000 impact-rated slider | $850 - $1,200 |
The range depends on glass package (low-E coatings add cost), whether the original frame is reusable or needs replacement, and whether we’re pulling a permit. Every quote we give in Naples is a line-item price: the sash or frame cost, the part cost, labor, and any permit fees. No change orders unless the wall opens up and shows rot we couldn’t see from the outside. Ed Winslow’s name is on the door, and our 36500-Day Done Right Promise means if the window isn’t right after we set it, we come back and make it right.
If you already have a written estimate from someone else, bring it to us. We’ll give you a free second opinion and show you exactly where the number moves.
DIY or Call Us?
You can safely do a few things: clean the track with a dry brush (not WD-40, it attracts grit), check the label for your series number, and take a photo of the failure to send us. What you should not do is pull the sash out of an ES impact window yourself. Those sashes are heavy, the balance springs hold tension, and if the frame is out of square, you’ll end up with a bent rail and a bigger repair bill.
The honest answer for most ES window replacements is that the labor is the hard part, not the part. Getting the reveal even, sealing the frame correctly against Naples wind-driven rain, and setting the rollers so the sash doesn’t drag takes a practiced hand. Call us at (239) 899-6411 and we’ll come take a look, no trip charge if you’re in our home county.
FAQs
Expect ten to fifteen years from ES Window seals and hardware in Naples, with shorter lifespans on west-facing windows that take direct afternoon sun and salt air. The glass itself can last decades, but the seals, rollers, and locking hardware go first.
Yes, if the failure is isolated to the roller, lock, weatherstripping, or sill gasket. If the seal has failed and the glass is fogged, the only correct fix is a replacement sash or window. We’ll tell you which one you need without upselling. Call (239) 899-6411 for an honest assessment.
Most single-window replacements are done in two to three hours once the replacement sash arrives. If we’re replacing the full frame and pulling a permit, plan for a half day. We carry common ES rollers, locks, and gaskets on the truck.
We stock the most common ES Windows parts, including rollers, lock strikes, and sill gaskets, and we can order any OEM ES component. We’re an independent installer, not affiliated with ES Windows, but we’re an authorized dealer for their full product line, along with PGT, CGI, and CWS.
If your ES window is fogged, dragging, or won’t seal, don’t wait until hurricane season. Call (239) 899-6411 and we’ll get you on the schedule with a real quote, no surprises. We’re the one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Naples and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After