Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCWS Door Installation: The Naples Owner’s Guide
If you own a CWS door in Naples and a hinge, roller, lock set, or threshold has failed, we can match the right replacement part and install it, usually within a day or two of your call. Most CWS door repairs and full installations run $180 to $1,400 installed, depending on whether we’re swapping a single roller assembly, rebuilding a sliding track, or setting a brand-new panel. Homeowners typically discover the problem as a door that suddenly drags, won’t latch, or makes a grinding sound every time the kids head out to the pool.
We’re an independent installer, not a CWS dealership, which means we’re free to tell you when a quality aftermarket part will do the job every bit as well as the OEM equivalent, and when it won’t. Ed Winslow has been setting doors in Southwest Florida for over a decade, and his crews see the same failure patterns season after season, salt air, humidity, and daily use working against every moving part on a CWS door.
Which CWS Models This Applies To
CWS manufactures sliding glass doors, hinged entry doors, and French door systems, and the compatibility question always comes down to two things: the series code on your frame and the measurement of the part itself. Most CWS doors have a label on the top edge of the sliding panel or inside the hinge mortise that lists the series number, something like 9060, 9550, or a newer impact-rated line. Take a picture of that label before you call; it saves us a return trip and we can have the right part on the truck when we show up.
One compatibility gotcha we see in Naples regularly: CWS sliding door rollers changed from a 1-inch to a 1-1/4-inch housing around 2015, and the two are not interchangeable. If your door was installed before that, and many in older Naples neighborhoods like Park Shore or Moorings were, you need the smaller roller or the door will sit high and the lock won’t engage. We keep both sizes on the truck. For hinges and lock hardware, OEM CWS parts are worth the upcharge when the door is still under warranty or when the finish has to match exactly; for rollers and weatherstripping, we often recommend a commercial-grade aftermarket part that outlasts the original in coastal conditions.
Signs Your CWS Door Installation Is Failing
- Grinding or skipping when you slide it. The roller bearings are flattening, usually from sand and salt working into the housing. In Naples this is the number one failure we replace, especially on east-facing doors that catch the morning humidity and afternoon sun.
- Air or water visible at the bottom rail. The threshold gasket or the door sweep has compressed. CWS uses a specific dual-fin sweep, and the flare on it flattens after three to five years of Florida heat. Once it’s flat, your AC bill climbs and rain gets driven under the door during our summer storms.
- The door drops when you lift the latch, or won’t latch at all. The roller adjustment screws have walked, or a roller housing cracked. Every month of running a misaligned door accelerates wear on the tracks, so it’s cheaper to fix early.
- Visible corrosion on the lower track corners. CWS frames are aluminum, so the frame itself usually survives, but the steel fasteners inside the track are not all stainless on older models. Corroded fasteners can cause the track to bow, which no roller can ride cleanly.
- The lock turns but the hooks don’t throw. CWS multi-point locks use internal zinc gears that strip under force, especially on doors that were slamming in the wind. We’ve rebuilt dozens of these and can usually save the existing handle set.
Replacement Cost & What’s Included
In Naples and the surrounding Collier County area, we quote CWS door work at fixed, upfront prices so the number on the estimate is the number on the invoice. Here’s what homeowners can expect:
- Roller replacement (both panels): $180 to $340 installed, including the rollers, track cleanup, and re-adjustment.
- Door sweep or threshold gasket replacement: $140 to $260, depending on panel width.
- Lock set repair or replacement (multi-point): $220 to $480 for a complete CWS-compatible lock rebuild.
- New CWS or CWS-compatible sliding glass door (installed): $2,400 to $5,800, including haul-away, flashing, and finish trim.
The price is driven by part availability, the condition of the existing frame, and whether we’re matching an existing finish or doing a full door replacement. Every CWS door installation includes new fasteners, fresh weatherstripping where it’s touched, and our labor warranty. We also flag any adjacent issues we find at the estimate, not after we’ve started pulling screws.
DIY or Call Us?
On a sliding glass door, the parts are under spring tension and a panel can weigh 180 pounds or more. A door coming off its track can shatter and a fractured roller housing can turn a simple afternoon into a trip to the emergency room. We’re direct about it: we don’t recommend removing a CWS door panel yourself. What you can safely do is vacuum the lower track, check the label I mentioned earlier, and look at whether the rollers are visibly flat. If you’re handy and frustrated, call us before you pick up a tool. The dispatch asks what you’re seeing, Ed reviews it, and we tell you honestly whether it’s a call we should make.
We don’t charge a trip fee inside our home county, and every estimate includes a written, line-item quote. If you’ve already got a written estimate from another company, bring it in, we’ll give you a free second opinion and the 10% discount for seniors and veterans applies on the final price.
You can reach us at (239) 899-6411. A real person answers, day or night.
FAQs
The rollers and weatherstripping on a CWS door generally last five to eight years in Naples; the frame itself usually lasts decades. Coastal salt air and daily use wear out moving parts much faster here than in inland Florida, which is why we treat the hardware as a maintenance item, not a permanent one. Call (239) 899-6411 if your door is sticking, scraping, or letting in air.
Yes, some CWS door components can be repaired. Lock sets can often be rebuilt with new internal gears, and tracks can sometimes be re-fastened or shimmed. Rollers and sweeps, on the other hand, get replaced, because they wear to failure and there’s nothing left to rebuild. If you’re not sure which category your problem falls into, send us a photo or tell the dispatcher what you see; we’ll tell you straight.
A typical roller, sweep, or lock replacement takes an hour or two on site. A full CWS door installation, including removing the old panel and setting the new one, runs a half day to a day depending on framing condition. Call (239) 899-6411 and we’ll cover the timeline for your specific door when we schedule the estimate.
We stock the most commonly replaced CWS parts on our trucks in Naples, specific roller sizes, lock rebuild kits, sweeps, and thresholds. Specialized or finish-matched hardware may take a few days to source. If we don’t have it in the truck, we’ll tell you before you book, so there’s no surprise when the tech arrives.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Naples and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.